My videos are for educational purposes only. You can find the parts on eBay at the following links: http://www.ebay.com/itm/Coil-for-housing-box-of-clock-/141655876923?ssPageName=ADME:L:LCA:US:1123 http://www.ebay.com/itm/Housing-case-for-coil-/141655876427?ssPageName=ADME:L:LCA:US:1123 http://www.ebay.com/itm/Rotor-for-coil-of-a-clock-/141655876007?ssPageName=ADME:L:LCA:US:1123 Please watch especially around the end of the video how we get above 800V. This concept can be developed in the future with a larger amperage. Personally there is nothing like the low speed PMG that works in a stable and friendly manner and can last so many years without risks, high rpm or noise. This is the reason I prefer the gearbox prototype with the low speed PMG. It would be very wise to make a stronger one later on with a decent PMG from 5 KW and above that will work quietly and be stable for years powering a home without any problem but we respect this QEG as well and may try to build a bigger one as well. If you wish to build one of those small QEG yourself you can look at eBay for the components. I will try to find the links to the parts again and will post them so you can purchase them, they are cheap. And you can use a tiny DC motor either from an old tape or CD/DVD player between 6 to 12V will be enough to get 220V. The rotor can be made of magnets or ferrite. Thank you.